Titanium oxide

Produced by chemical synthesis
Average particle size: 6±2 nm.
Aqueous colloidal solutions: 5, 10 or 20 wt.%

Aqueous colloidal solution, 5 wt.%

Aqueous colloidal solution, 10 wt.%

Aqueous colloidal solution, 20 wt.%

Average particle size: 2-5 nm.
Mixed brookite / anatase phase.
Stabilized by tetramethylammonium hydroxide
Aqueous colloidal solution, 20 wt.%

Average particle size: 4-8 nm. Anatase phase.
Stabilized by dodecylphosphonic
acid and hexylamine.
Forms transparent colloidal
solutions in chloroform.
Supplied as a powder

Average particle size: 4-8 nm. Anatase phase.
Stabilized by benzoic acid.
Forms transparent colloidal solutions in MEK
(methylethylketone) and many epoxides.
Supplied as a 100 g/L solution in MEK

Produced by chemical synthesis
Average particle size: 4-8 nm
Dry nanopowder, free of organic stabilizers.
Easily forms collidal solutions in water.
Can be used to produce coatings

Publications with PlasmaChem products

Average particle size: 2±1 nm. Dry nanopowder.
Readily forms colloidal solutions in water (up to 900g/L) and methanol

Photocatalytic standard P25.
Dry Nanopowder. Mixed rutile / anatase phase
Average primary particle size: 21±5 nm.
Specific surface: 50±10 m²/g; Purity after ignition: >99,5%
Ignition loss: < 2%; Moisture: < 1,5%
Al2O3 < 0,3 wt.%; SiO₂ < 0,2 wt.%
Tapped density: ca. 130 g/L

Photocatalytic standard P25.
Dry Nanopowder. Mixed rutile / anatase phase
Average primary particle size: 21±5 nm.
Specific surface: 50±10 m2/g; Purity after ignition: >99,5%
Ignition loss: < 2%; Moisture: < 1,5%
Al2O3 < 0,3 wt.%; SiO₂ < 0,2 wt.%
Tapped density: ca. 130 g/L

Publications with PlasmaChem products

Length: ca. 100 nm. Diameter: 20-40 nm
Stabilized only with citrate.
Phase: anatase
Supplied as a 1 wt.% aqueous solution

Length full range: 0,5-100 μm
Diameter: 50-100 nm
Phase: anatase
Dry powder